Descriptions:
H250 Series: 1-, 2- and 3-pole fuse blocks for use with Class H fuses.
R250 Series: 1-, 2- and 3-pole fuse blocks for use with Class R fuses (Cooper Bussmann LPN-RK and FRN-R, DLN-R and KTN-R fuses).

Ratings:
Volts: 250Vac/dc (H250 & R250 Series)
Amps: 1⁄10-600A
SCCR: H250 Series; 10kA RMS Sym. R250 Series; 200kA RMS Sym.

Agency Information: CE, UL Listed UL 4248, Guide IZLT, File E14853; CSA Certified, Class 6225-01, File 47235.
Flammability Rating: UL 94V0.

Features and Benefits
• H250 fuse blocks provide one, two and three pole housing for Class H, K and R fuses at 250Vac.
• H250 fuse blocks are listed with a Short-Circuit Current Rating of 10kA RMS Sym.
• R250 fuse blocks provide one, two and three pole housing for Class R fuses at 250Vac.
• R250 fuse blocks are listed with a Short-Circuit Current Rating of 200kA RMS Sym.

Typical Applications
• 250Vac/dc or less Control Systems
• 250Vac/dc or less Industrial Control
• 250Vac/dc or less Industrial Control Circuits

Class H Fuseblocks (250V) Catalog Data (for NON and REN Fuses)

Amps	Poles	Terminal Type (Suffix No.)									Figure Number	Wire Range
		Screw					Box Lug w/
		Catalog Number	.	Clip with Reinforced Spring	Pressure Plate	Pressure Plate & Clip with Reinforced Spring	.	Clip with Reinforced Spring	Copper Only	0.25. Quick Connect
1/10 to 30	1	H25030-1	S	SR	P	PR	C	CR	.	Q	1	C, CR #2-14 Cu, #2-12 Al P, PR #10-18 Cu Only Q N/A S, SR #10-18 Cu Only
	2	H25030-2								.	2
	3	H25030-3									3
31 to 60	1	H25060-1	.	.	.	.			CO		4	C, CR #2-14 Cu, #2-8 Al CO #2-14 Cu Only
	2	H25060-2									5
	3	H25060-3									6
61 to 100	1	H25100-1		SR			.		.		7	CR #1/0-8 Cu/Al SR #8W/ Ring Terminal
	2	H25100-2									8
	3	H25100-3									9
101 to 200	1	H25200-1		.							10	CR 250kcmil-6 Cu/Al
	3	H25200-3									11
201 to 400	1	H25400-1						CR*			12	CR 500kcmil-4 Cu/Al
	3	H25400-3						CR†			13
401 to 600	1	H25600-1						CR			14	CR (2) 500kcmil-4/0 Cu/Al
	3	H25600-3						CR†			15

*UL Recognized, No CSA Certification.
†No UL, No CSA Certification.

Class R Fuseblocks (250V) Catalog Data (for LPN-RK, FRN-R, DLN-R and KTN-R Fuses

Amps	Poles	Catalog Number	Terminal Type (Suffix No.)					Fig. No.	Wire Range
			Screw w/		Box Lug w/		0.25" Quick-Connect
			.	Pres. Plate	.	Clip Cu Only
1/10 to 30	1	R25030-1	SR	PR	CR	COR	QR*	1	COR #6-14 Cu Only CR #2-14 Cu, #2-12 Al PR #10-18 Cu Only QR N/A SR #10-18 Cu Only
	2	R25030-2					.	2
	3	R25030-3						3
31 to 60	1	R25060-1	.	.		.		4	CR #2-14 Cu, #2-8 Al
	2	R25060-2						5
	3	R25060-3						6
61 to 100	1	R25100-1						7	CR 1/0-8 Cu/Al
	2	R25100-2						8
	3	R25100-3						9
101 to 200	1	R25200-1						10	CR 250kcmil-6 Cu/Al
	3	R25200-3						11
201 to 400	1	R25400-1			CR‡			12	CR 500kcmil-4/0 Cu/Al
	3	R25400-3			CR†			13
401 to 600	1	R25600-1			CR			14	CR 500kcmil-4/0 Cu/Al
	3	R25600-3			CR†			15

*UL Recognized, No CSA Certification.
†No UL, No CSA Certification.
‡UL Recognized, CSA Certification

Dimensions – in
250V 1⁄10 to 30A

250V, 31A to 60A

250V, 61A to 100A

250V, 101A to 200A


250V, 201A to 400A


250V, 401A to 600A

---

Recommended DIN rail adapters for the 1⁄10-30A series

Description:
Cooper Bussmann® DIN rail adapters permit secure, positive snap-on mounting of Cooper Bussmann 0-30A fuse blocks (one-, two-, or three-pole) onto various size rails to eliminate costly and time consuming drilling, tapping, and screw mounting. Adapters mechanically lock into mounting holes of fuse blocks in seconds to become an integral part of the block.
One adapter is required for one- and two-pole Cooper Bussmann blocks. Two adapters are required for three-pole blocks.
With the exception of the 32mm DIN rail, all blocks with adapters can be removed from a rail simply by pulling up its release tab.
Use of rail end-stops on both sides of adapters is recommended.

Construction: Molded from “Lexan™ 241” for high strength and flexibility.

Features:
-Edison DIN rail adapters permit secure, positive snap-on mounting of Edison 0 to 30 amp fuse blocks (one-, two-, or three-pole) on various size rails. (rail mounting eliminates costly and time consuming drilling, tapping, and screw mounting.)
-Molded from Lexan? 141.Adapter mechanically locks into mounting hole of fuse block in seconds to become an integral part of the block.
-One adapter is required for Edison one- and two-pole blocks. Two adapters are required for three-pole blocks.
-With the exception of the 32mm DIN rail, all blocks with adapters can be removed from a rail simply by pulling up its release tab.
-Use of rail end-stops on both sides of adapters is recommended.

Catalog Numbers (For 0-30A Fuse Blocks)

Catalog Numbers	Fuse Block Class	Rail Type	Size	Adapter Color
DRA-1	CC	DIN	15mm (Sym.)	Black
	G		32mm (Asym.)
	*H (250V)		35mm (Sym.)
DRA-2	*R (250)	American	17/64" (Sym.)	Gray
	M Type		(also 35mm DIN)

Package Quantities: standard-10; bulk-100 (Cat. No. BK/DRA-1 or BK/DRA-2.)
*Mounting on 15mm rails is not recommended.
NOTE—Newer Cooper Bussmann fuse blocks have elongated block-to-adapter mounting