cooper bussmann

TCP™ Series Telecom Circuit Protector

  
TCP1.25A,Telecom Circuit Protector

Description
•The first and most reliable surface mount telecom circuit protector designed to protect against power cross faults and comply with all surge requirements.
•Allows compliance with telecom regulatory standards including Bellcore GR 1089, UL 1950/60950, and FCC part 68. Application circuit testing is recommended.
•Eliminates the need for a current limiting resistor.
•Protects against overcurrent conditions found in telecom Subscriber Line Interface Cards (SLICs), xDSL Modem Applications, Set-Top Boxes, and Consumer Premises Equipment (CPE).
•TCP1.25A tested and confirmed compatible with STMicroelectronics Trisil™ Transient Surge Arrestor  (list of part numbers below)

STMicroelectronics Trisil™ P/N’s
- SMP100LC-XXX
- SMP100MC-XXX

ELECTRICAL CHARACTERISTICS
% of Amp Rating Opening Time
100% 4 Hours Minimum
250% 1 Second Minimum
250% 4-10 Seconds Typical
250%* 120 Seconds Maximum
300% 10 Seconds Maximum
*If the device does not open at 250% within 120 seconds, increase current to 300% of amp rating.Device must open in 10 seconds max.
 
Environmental Data
• Life Test: MIL-STD-202, Method 108A, Test Condition D
• Load Humidity:MIL-STD-202, Method 103B
• Moisture Resistance:MIL-STD-202, Method 106E
• Thermal Shock: MIL-STD-202, Method 107D, air-to-air
• Case Resistance:EIA/IS-722
• Resistance to Dissolution of Metallization: ANSI J-STD-002, Test D
• Mechanical Shock:MIL-STD-202, Method 213B, Test Condition A
• High Frequency Vibration: MIL-STD-202, Method 204D, Test Condition D
• Resistance to Solvents: MIL-STD-202, Method 215A

Agency Information
• UL Recognition Card: JDYX2/E19180 
• CSA Component Certification Record and Class No.: 053787C000, 1422 30
 
Ordering
•Specify packaging, product and option code (i.e., TR2/TCP1.25-R)
 
Soldering Method
•Wave Immersion: 260°C, 10 sec max.
•Infrared: 260°C, 30 sec max.

Dimensions mm⁄(inches)


LIGHTNING SURGE SPECIFICATIONS
Surge Specification Surge Repetitions Waveform
(µSec.)
Current (A) Voltage (V) Performance
Requirement
FCC 47 Part 68 Longitudinal Type A 2 10x160 100 per fuse 1500 Fuse cannot open
FCC 47 Part 68 Metallic Type B 2 10x560 100 800 Fuse cannot open
Bellcore GR-1089-CORE First Level Lightning 50 10x1000 100 1000 Fuse cannot open
Bellcore GR-1089-CORE First Level Lightning 50 2x10 500 2500 Fuse cannot open
Surge out   1 10x160 160 N/A Fuse cannot open
Surge out   1 10x560 115 N/A Fuse cannot open

 
ELECTRICAL AND POWER CROSS SPECIFICATIONS
Product
Code
Voltage
Rating
AC
Interrupting
Rating*
250VAC    600VAC
DC Cold
Resistance** (ohms)
min.     typ.     max.
Typical
Melting
I2t†
Maximum
Total
Clearing
Typical
Voltage
Drop‡
Alpha Code
Marking
1st Code   2nd Code
TCP1.25A 250 V 50 A 60 A 0.070 0.090 0.110 22.2 A2s 100 A2s 150mV J R***
* AC Interrupting Rating (Measured at designated voltage, 100% power factor)
** DC Cold Resistance (Measured at 10% of rated current)
*** On RoHS Compliant Version (-R option)
† Typical Melting I2
t (Measured with a battery bank at 60V DC, 10x-rated current, time constant of calibrated circuit less than 50 microseconds)
‡ Typical Voltage Drop (Measured at rated current after temperature stabilizes)

Special Investigation
The TCP1.25A is designed to provide overcurrent protection for telecom SLIC, xDSL modem, and set-top box applications regardless of the overvoltage device selected. To provide an easier specification experience, Cooper Bussmann and STMicroelectronics have joined together to provide a special test report confirming the coordination between the TCP1.25A and SMP100MC-270 devices.

TEST CIRCUITS


TEST PROGRAM
Test Standard Results
Lightning Surge Tests
10/1000µs + and –1kV 100A (25 pulses of each polarity) Bellcore GR-1089 Passed
2/10µs + and –2.5 and 5kV 500A (10 pulses of each polarity) Bellcore GR-1089 Passed
10/560µs + and –800V 100A (1 pulse of each polarity) FCC Part 68 Passed
10/160µs + and –1.5kV 200A (1 pulse of each polarity) FCC Part 68 Passed
10/700µs + and –1.5kV 37.5A (5 pulses of each polarity) K20 Passed
Electrical and Power Cross Tests
600V 3A 1.1s (first level) Bellcore GR-1089 Passed
277V 25A (second level) Bellcore GR-1089 Passed
600V 60A 5s(second level) Bellcore GR-1089 Passed
600V 40A 1.5s UL 60950 Passed
600V 2.2A 30min UL 60950 Passed
600V 1A 0.2s (A criteria) K20 Passed
230V 1.44A/0.77A/0.38A 15min (A criteria) K20 Passed
230V 23A 15min (A criteria) K20 Passed
For additional information on STMicroelectronic’s Trisil™ Product line, please see www.st.com/protection


TCP500MA & TCP2A,Telecom Circuit Protector

Description
• Designed to protect Consumer Premises Equipment from harmful overcurrents.
•Allows compliance with telecom regulatory standards including UL 1950/60950, and FCC part 68. Application circuit testing is recommended.
•Eliminates the need for a current limiting resistor.
ELECTRICAL CHARACTERISTICS
% of Amp Rating Opening Time
100% 4 Hours Minimum
250% 1 Second Minimum
250% 4-10 Seconds Typical
250%* 120 Seconds Maximum
300% 10 Seconds Maximum
*If the device does not open at 250% within 120 seconds, increase current to 300% of amp rating. Device must open in 10 seconds max

Agency Information
• UL Recognition Card: JDYX2/E19180
• CSA Component Certification Record and Class No.: 053787C000, 1422 30
 
Environmental Data
• LifeTest: MIL-STD-202, Method 108A, Test Condition D
• Load Humidity:MIL-STD-202, Method 103B
• Moisture Resistance: MIL-STD-202, Method 106E
• Thermal Shock: MIL-STD-202, Method 107D, air-to-air
• Case Resistance:EIA/IS-722
• Resistance to Dissolution of Metallization:ANSI J-STD-002, Test D
• Mechanical Shock:MIL-STD-202, Method 213B,Test Condition A
• High Frequency Vibration: MIL-STD-202, Method 204D, Test Condition D
• Resistance to Solvents: MIL-STD-202, Method 215A

Ordering
•Specify packaging, product and option code (i.e., TR2/TCP500-R)
 
Soldering Method
•Wave Immersion: 260°C, 10 sec max.
•Infrared: 260°C, 30 sec max.

Dimensions mm⁄(inches)


LIGHTNING SURGE SPECIFICATIONS
Surge Specification Surge Repetitions Waveform
(µSec.)
Current (A) Voltage (V) Performance
Requirement
TCP 500mA tested
FCC 47 Part 68 Longitudinal Type B 2 5x320 37.5 N/A Fuse cannot open
FCC 47 Part 68 Metallic Type A 2 10x560 100 800 Fuse must open safely
Surge out   25 10x160 65 N/A Fuse cannot open
TCP2A tested
FCC 47 Part 68 Longitudinal Type A 2 10x160 100 per fuse 1500 Fuse cannot open
FCC 47 Part 68 Metallic Type B 2 10x560 100 800 Fuse cannot open
Bellcore GR-1089-CORE First Level Lightning 50 10x1000 100 1000 Fuse cannot open
Bellcore GR-1089-CORE First Level Lightning 50 2x10 500 2500 Fuse cannot open
Surge out   1 10x160 160 N/A Fuse cannot open
Surge out   1 10x560 115 N/A Fuse cannot open


ELECTRICAL AND POWER CROSS SPECIFICATIONS
Product
Code
Voltage
Rating
AC
Interrupting
Rating*
250VAC    600VAC
DC Cold
Resistance** (ohms)
min.     typ.     max.
Typical
Melting
I2t†
Maximum
Total
Clearing
Typical
Voltage
Drop‡
Alpha Code
Marking
1st Code   2nd Code
TCP500mA 250 V 50 A 40 A 0.420 0.530 0.640 1.3 A2s 100 A2s 471mV F R***
TCP2A 250 V 50 A 60 A 0.050 0.075 0.100 30 A2s 100 A2s 205mV N
* AC Interrupting Rating (Measured at designated voltage, 100% power factor)
** DC Cold Resistance (Measured at 10% of rated current)
*** On RoHS Compliant Version (-R option)
† Typical Melting I2
t (Measured with a battery bank at 60V DC, 10x-rated current, time constant of calibrated circuit less than 50 microseconds)
‡ Typical Voltage Drop (Measured at rated current after temperature stabilizes)


TIME CURRENT CURVE


PACKAGING CODE
Packaging Code Description
TR2 2,500 pieces of fuses on 24mm tape-and-reel on 13 inch (330mm) reel per EIA Standard 481, 8mm pitch


OPTION CODE
Option Code Description
-R RoHS Compliant Version (Sn plating w/ Ni barrier)

----------------------------------
伊顿 EATON BUSSMANN 规格资料查询
伊顿 EATON BUSSMANN 规格类型
或许您会感兴趣...
联系客服
深圳市博孚美科电子有限公司
总机: 0755-82862885, 82862629
传真: 总机 转 801
邮箱: service@bussmann.net.cn
网址: http://www.bussmann.net.cn
资料中心: http://www.bm-bussmann.com