FP2 Series Flat-Pac™ Low Profile Inductors - 伊顿EATON BUSSMANN产品资料中心

Description

• 125°C maximum total temperature operation

• Surface mount inductors designed for higher speed switch mode applications requiring lower inductance and high current

• Dual conductors allow for low inductance and high current or high inductance and lower current

• Inductance range from .047uH to 0.480uH

• Current range up to 42 Amps

• Meets UL 94V-0 flammability standard

• Ferrite core material

Applications

• Next generation microprocessors

Environmental Data

• Storage temperature range: -40°C to +125°C

• Operating ambient temperature range: -40°C to +125°C(range is application specific).

• Solder reflow temperature: +260°C max. for 10 secondsmax.

Packaging

• Supplied in tape and reel packaging, 1700 (FP2-S and FP2-D) and 950 (FP2-S200 and FP2-VXXX) per reel

Parallel Mode
Part Number	Inductance µH (rated)	OCL(1) µH± 15%	I rMS(2) Amps	I SAT(3) Amps	DCr(4) Ω nom.	Height	Volt-µ Sec (VµS) ref.(5)
Single Conductor
FP2-S047-R	0.047	0.047	39.0	42.0	0.00024	3.00	0.75
FP2-S068-R	0.068	0.068	39.0	32.0	0.00024	3.00	0.75
FP2-S082-R	0.082	0.082	39.0	26.0	0.00024	3.00	0.75
FP2-S100-R	0.100	0.100	39.0	22.0	0.00024	3.00	0.75
FP2-S120-R	0.120	0.120	39.0	18.0	0.00024	3.00	0.75
FP2-S200-R	0.200	0.200	37.0	19.0	0.00028	5.00	0.99
FP2-V050-R	0.050	0.050	37.0	70.0	0.00028	5.00	0.99
FP2-V100-R	0.100	0.100	37.0	40.0	0.00028	5.00	0.99
FP2-V120-R	0.120	0.120	37.0	33.0	0.00028	5.00	0.99
FP2-V150-R	0.150	0.150	37.0	25.5	0.00028	5.00	0.99
Double Conductor
FP2-D047-R	0.047	0.047	37.0	42.0	0.00026	3.00	0.75
FP2-D068-R	0.068	0.068	37.0	32.0	0.00026	3.00	0.75
FP2-D082-R	0.082	0.082	37.0	26.0	0.00026	3.00	0.75
FP2-D100-R	0.100	0.100	37.0	22.0	0.00026	3.00	0.75
FP2-D120-R	0.120	0.120	37.0	18.0	0.00026	3.00	0.75
Series Mode
Part Number	Inductance µH ref. (rated)	OCL(1) µH ref.	I rMS(2) Amps	I SAT(3) Amps	DCr(4) Ω ref.	Height	Volt-µ(5) Sec (VµS) ref.
Double Conductor
FP2-D047-R	0.188	0.188	16.0	21.0	0.0013	3.00	1.50
FP2-D068-R	0.272	0.272	16.0	16.0	0.0013	3.00	1.50
FP2-D082-R	0.328	0.328	16.0	13.0	0.0013	3.00	1.50
FP2-D100-R	0.400	0.400	16.0	11.0	0.0013	3.00	1.50
FP2-D120-R	0.480	0.480	16.0	9.0	0.0013	3.00	1.50

Notes:
(1) Open Circuit Inductance Test Parameters: 1MHz, 0.25Vrms, 0.0Adc.

(2) RMS current for an approximate ∆T of 40°C without core loss. It is recommended that the temperature of the part not exceed 125°C.

(3) Peak current for approximately 30% rolloff at 20°C.

(4) DCR limits 20°C.

(5) Applied Volt-Time product (V-µS) across the inductor. This value represents the applied V-µS at 500kHz necessary to generate a core loss equal to 10% of the total losses for 40°C temperature rise.

Mechanical Diagrams

Single Conductor

Dual Conductor

Notes:
(1) Marking SXXX = S: Single Conductor Style, DXXX = D: Dual Conductor Style, XXX - last three digits of part number. Date Code:yww = y: Last Digit of year, ww: week of year.

(2) All Dimensions are in millimeters unless otherwise specified.

(3) For parallel mode operation, connect terminals 1 to 4 and 2 to 3 on PCB (use Single Conductor PCB Layout) For series mode operation, connect terminals 2 to 4 on PCB (Dual Conductor Model).

Packaging Information

Inductance Characteristics

Core Loss