HC1 Series Single Winding High Current Inductor - EATON BUSSMANN(巴斯曼)资料中心

Description:

• 125°C Maximum total operating temperature

• Designed for high current, low voltage applications

• Low DCR, high efficiency

• Foil construction for higher frequency circuit designs

• Suited for IR and vapor reflow solder

• Frequency range 1kHz to 1MHz

• Ferrite core material

Applications

• Next generation microprocessors

• High current DC-DC converters

• Computers

Environmental Data

• Storage temperature range: -40°C to +125°C

• Operating temperature range: -40°C to +125°C (range is application specific).

• Solder reflow temperature: +260°C maximum for 10 seconds maximum.

Packaging

• Units supplied in tape and reel packaging, 250 parts on

13” diameter reel.

Product Specifications

Part Number	Rated Inductance μH	OCL ((1)) ± 15% μH	Irms ((2)) Amps (Approx.)	Isat ((3)) Amps (Approx.)	DCR (Ω) Max.@ 20°C	Volt- μSec ((4)) (V μS) (ref.)
HC1-R22-R	0.22	0.218	51.42	40.5	0.00036	1.83
HC1-R30-R	0.30	0.291	51.42	31.8	0.00036	1.83
HC1-R57-R	0.57	0.572	37.83	33.4	0.00068	3.66
HC1-R87-R	0.87	0.866	28.01	31.0	0.00123	5.49
HC1-1R0-R	1.0	1.12	28.01	25.4	0.00123	5.49
HC1-1R7-R	1.7	1.66	22.30	22.2	0.0020	7.33
HC1-2R3-R	2.3	2.29	22.30	16.7	0.0020	7.33
HC1-3R6-R	3.6	3.59	16.76	13.4	0.0035	9.16
HC1-5R1-R	5.1	5.15	12.79	11.2	0.0057	10.99
HC1-7R8-R	7.8	7.85	12.79	6.7	0.0057	10.99
HC1-100-R	10	10.5	12.79	5.3	0.0057	10.99

1) OCL (Open Circuit Inductance) Test parameters: 300kHz, .25Vrms, 0.0Adc & Isat.

2) Irms Amps for approximately ΔT of 40°C. DC current for an approximate ΔT of 40°C without core loss. Derating is necessary for AC currents. It is recommended that the temperature of the part not exceed 125°C under worst case operating conditions verified in the end application.

3) Isat Amps Peak for approximately 30% rolloff @ 20°C

4) Applied Volt-Time product (V-μS) across the inductor. This value represents the applied V-μS at 200kHz necessary to generate a core loss equal to 10% of the total losses for 40°C temperature rise. See Core Loss Graph.

5) Part number definition - HC1-xxx-R: • HC1 = Product code and size

• -xxx = Inductance value

• R = Decimal point (if no “R” is present, third character = number of zeros)

• -R Suffix = RoHS compliant

Dimensions - mm